Эта статья является препринтом и не была отрецензирована.
О результатах, изложенных в препринтах, не следует сообщать в СМИ как о проверенной информации.
Оптимизация режима отверждения толстостенных изделий авиационного назначения из композиционного материала
1. F. Taddei, G. Struzziero, and V. Michaud, “Mitigation of infusion and cure-induced defects for thick thermosetting composites: Current challenges and future trends,” 2025, John Wiley and Sons Inc. doi: 10.1002/pc.29795.
2. E. Ruiz and F. Trochu, “Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts,” Compos Part A Appl Sci Manuf, vol. 36, no. 6, pp. 806–826, Jun. 2005, doi: 10.1016/j.compositesa.2004.10.021.
3. G. Zhang et al., “Multi-objective optimisation of curing cycle of thick aramid fibre/epoxy composite laminates,” Polymers (Basel), vol. 13, no. 23, Dec. 2021, doi: 10.3390/polym13234070.
4. Zhang, Jing, Xu, Yachen and Huang, Pei. "Effect of cure cycle on temperature/degree of cure field and hardness for epoxy resin" e-Polymers, vol. 10, no. 1, 2010, pp. 007. https://doi.org/10.1515/epoly.2010.10.1.41
5. S. Chava, S. Namilae, and M. Al-Haik, “Residual stress reduction during composite manufacturing through cure modification: In situ analysis,” J Compos Mater, vol. 56, no. 6, pp. 975–988, Mar. 2022, doi: 10.1177/00219983211066545.
6. “Cure Cycles & Void Content in Composite Laminates.” Accessed: Jul. 05, 2025. [Online]. Available: https://studylib.net/doc/27632863/effect-of-cure-cycles-on-void-content
7. Ya. Chen, P. P. Maung, and G. V. Malysheva, “Investigating Curing Kinetics for a Thin-Walled Carbon Fibre Structure,” Herald of the Bauman Moscow State Technical University. Series Mechanical Engineering, no. 5 (134), pp. 58–70, Oct. 2020, doi: 10.18698/0236-3941-2020-5-58-70.
8. “ТЕХНОЛОГИЯ И ТЕХНОЛОГИЧЕСКИЕ МАШИНЫ.”
9. R. Gebart, “Thermal runaway criterion for thick polymer composites,” Compos Part A Appl Sci Manuf, vol. 182, Jul. 2024, doi: 10.1016/j.compositesa.2024.108187.
10. A. Muc, P. Romanowicz, and M. Chwał, “Description of the Resin Curing Process—Formulation and Optimization,” Polymers (Basel), vol. 11, no. 1, p. 127, Jan. 2019, doi: 10.3390/POLYM11010127.
11. J. Zhang, Y. Xu, and P. Huang, “Effect of cure cycle on temperature/degree of cure field and hardness for epoxy resin,” no. 007, 2010, [Online]. Available: http://www.e-polymers.org
12. S. Chava, S. Namilae, and M. Al-Haik, “Residual stress reduction during composite manufacturing through cure modification: In situ analysis,” J Compos Mater, vol. 56, no. 6, pp. 975–988, Mar. 2022, doi: 10.1177/00219983211066545.
13. “Effects of cure cycles on void content and mechanical propertiesof composite laminates”.
14. Y. Li, G. Chen, J. Ge, K. Liu, and J. Liang, “Modeling of curing process and residual stress analysis of thick-section thermosetting composites,” Acta Mechanica Sinica/Lixue Xuebao, vol. 42, no. 1, pp. 1–11, Jan. 2026, doi: 10.1007/S10409-024-24411-X/METRICS.
15. F. Taddei, G. Struzziero, and V. Michaud, “Mitigation of infusion and cure-induced defects for thick thermosetting composites: Current challenges and future trends,” 2025, John Wiley and Sons Inc. doi: 10.1002/pc.29795.
16. F. Rothenhäusler and H. Ruckdaeschel, “Interplay of curing and thermal degradation in epoxy resins cured with amino acids: Influence of the maximum curing temperature on the network structure, crystal morphology and mechanical properties,” J Appl Polym Sci, vol. 140, no. 45, Dec. 2023, doi: 10.1002/app.54655.
17. D. Liu et al., “Research on the Thermal Aging Characteristics of Cured Epoxy Resin Insulating Materials for DC Bushings,” Polymers (Basel), vol. 17, no. 8, Apr. 2025, doi: 10.3390/polym17081064.
18. V. I. Khaliulin and V. V. Batrakov, “Analysis of innovative methods application for production of composite integral parts,” Russian Aeronautics, vol. 59, no. 3, pp. 433–437, Jul. 2016, doi: 10.3103/S1068799816030223.
19. “ТЕПЛОПРОВОДНОСТЬ УГЛЕПЛАСТИКОВЫХ ПОЛИМЕРНЫХ ”.
20. T. A. Moreira, A. R. A. Colmanetti, and C. B. Tibiriçá, “Heat transfer coefficient: a review of measurement techniques,” Jun. 01, 2019, Springer Verlag. doi: 10.1007/s40430-019-1763-2.
21. K. E. A. Ohlsson, R. Östin, and T. Olofsson, “Step-transient method for measurement of the heat transfer coefficient at surfaces exposed to simulated building outdoor environments using the sol-air thermometer,” J Build Phys, vol. 42, no. 3, pp. 373–387, Nov. 2018, doi: 10.1177/1744259118764823.
22. J. V Beck, “A. M. (Ismail Investigation of Transient Heat Transfer Coefficients in Quenching Experiments,” 1990. [Online]. Available: http://heattransfer.asmedigitalcollection.asme.org/
23. M. N. Koleva and L. G. Vulkov, “A Galerkin Finite Element Method for the Reconstruction of a Time-Dependent Convection Coefficient and Source in a 1D Model of Magnetohydrodynamics,” Applied Sciences (Switzerland), vol. 14, no. 13, Jul. 2024, doi: 10.3390/app14135949.
24. D. K. Gartling, “CONVECTIVE HEAT TRANSFER ANALYSIS BY THE FINITE ELEMENT METHOD *,” 1977.
25. L. V. Ivanov, A. Yu. Baranov, A. Yu. Ikonnikova, and M. V. Baranov, “Calculation of natural convection heat transfer coefficient towards LNG based on finite element method,” Journal International Academy of Refrigeration, no. 3, 2023, doi: 10.17586/1606-4313-2023-22-3-74-79.
